Installed this outdoor shower and it performs beautifully. The unlacquered brass develops a gorgeous patina in sunlight. The round rain head delivers a luxurious flow. The cross handles feel truly premium.
The Antique Brass Wall Mounted Tub Filler with S-Spout shares the same honest, aged philosophy as its sibling — two pieces, two escutcheons, one lever — but the spout takes a different path from the wall to the tub. Where the L-shaped version steps directly outward and down, this one moves with more intention: rising slightly from its escutcheon, sweeping forward in a fluid S-curve, then angling back downward toward the water. The result is a spout with movement, with a suggestion of flow that the more angular form does not carry.
The patina is the same deeply earned antique brass that distinguishes these wall mounted pieces from anything lacquered or factory-finished. Dark oxidation spots sit across the large round valve escutcheon and along the spout body in the unpredictable pattern that only genuine brass aging produces - some patches darker, some areas still catching the warm gold tone beneath. The single slim lever, mounted at the center of the large escutcheon, controls everything with one precise movement. Below it, the S-curve spout mounts on its own smaller escutcheon, square-cut at the tip, the antique finish running continuously from wall to end.
This is unlacquered brass - a living finish that continues to develop honestly over time. The antique character you see today will deepen further as the brass responds to heat, steam, and daily contact. The lever tip will develop its own particular variation, the S-curve will darken at the bend where steam gathers most. Nothing is sealed. This tub filler will look different - and better - in ten years than it does today.
Handmade in solid brass by artisans with over two decades of experience. The same minimal conviction as its sibling - with a spout that moves.
Processing: 2-4 days.
Free Express Shipping: US (3-5 days), UK/EU (3-7 days), World (up to 14 days). No extra delivery fees (DDP).
Returns: 60 days for unused, original items. Email support@hevna.com.
Damaged? Email photos for a replacement or refund.
Pure Handcraft
Solid Brass & Copper
Drinking-Water Safe
Lifetime Support
No Two Alike
Strictly Limited
Every hevna faucet and pot filler is born in fire. Solid brass, poured by hand at nearly 1,000°C.
Never plated. Just honest metal, the kind that only grows more beautiful with age.
Each piece is cast on its own and freed by hand the moment the brass sets. It comes out rough and one of a kind.
Just the first version of a finish that will keep changing for the rest of its life.
From here, every casting is shaped entirely by hand.
The rough edges come off, the curves come up, all of it guided by eye and years at the bench.
This is the part only a person can do.
It depends on your tub. A freestanding tub sitting away from the wall takes a floor-mounted filler that stands beside it. A tub against a wall or with a deck takes a wall-mounted or deck-mounted filler. The key difference is the plumbing: a floor-mount needs its supply lines roughed into the floor, so it has to be planned before the floor is tiled. Each listing states its mount type in the specifications, so match it to your tub before ordering.
This is the most important thing to check, and it varies by model. A tub filler installs in two parts: the rough-in that carries the water inside the floor or wall, and the trim and spout that mount on top. Some models ship complete, others sell the rough-in separately so it can go in early while the finish piece arrives later. The product specifications state exactly what is in the box. If you are unsure, message us before ordering and we will confirm.
About 4 to 6 inches from the rim is the sweet spot. Close enough to pour cleanly into the tub, far enough to clean around it and avoid splashing over the edge. Plan the position with your plumber before the supply lines are set in the floor, because moving it afterward means opening the floor again.
This varies by model. Some fillers include a handheld sprayer on a flexible hose, others are spout only. The listing states clearly what is included, so check the specifications for the one you want.
Yes. The connections are standard, so any competent plumber installs it like a quality fixture. The one thing to plan early is the rough-in: a floor-mount must be set into the floor before tiling, and a wall-mount into the wall before it is finished, so bring your plumber in before the surfaces go down. Like every hevna fixture, the filler is solid brass with a living finish that deepens over time and polishes back to bright whenever you want.
After processing: US 3 to 5 business days, UK and EU 3 to 7 business days, rest of the world up to 14 business days.
Delivered to your door, tracked and insured. No extra delivery fees - duties and taxes included.
Return it within 60 days of delivery, unused and in its original packaging, for a full refund.
No restocking fee. If you have a question before you reach that point, contact us first. Most issues are simpler to solve than a return.